Have a question/problem concerning a Buschur Racing product? Installation instructions inside.
Buschur Racing Double pumper fuel system. EVOLUTION 8 and 9. Contents: (1) Fuel pump assembly with twin HO fuel pumps (1) SS high flow 10 micron inline fuel filter (5) Fuel injection hose clamps (1) Pressure switch assembly Installation instructions:
The Buschur Racing, Race FMIC kit for the EVO X is complete! The Race FMIC kit we have done and finalized for the EVO X will be the only one you need. We were not happy with a whimpy core that was good for only 750 whp. We wanted to do the biggest intercooler we could without any major...
Recently the Buschur Racing Inline Manual Boost Controller has become a hot seller for the Genesis Coupe. With all of the boost controllers going out the door here I wanted to put together a post for everyone purchasing them so they know exactly how to install it when it arrives. Its VERY...
1st Generation DSM Factory Wire Colors Black/White- 12 Volts Yellow/Green- Triggers 1 and 4 cylinders Yellow/Black-Triggers 2 and 3 cylinders 2nd Generation DSM Factory Wire Colors
BUSCHUR RACING Inline Manual Boost Controller Instructions Thank you for purchasing the Buschur Racing Inline Manual Boost Controller. We have put together these instruction to ease the installation of your new part. This should take about 20 minutes to install. Your new boost...
EXHAUST: INTAKE:
Good evening I recently installed the double pumper in my evo and I figured I would share the install with you . I picked the buschur racing double pumper system because I feel that it is the best solution for those requiring more fuel for the following reasons. 1) utilizes stock lines No...
Here is some more tech for your archives dave.. Hope you don't mind all of my clutter. SO, I have come to the conclusion that I drive a PIG everyday. Out of shear curiosity, I decided to weigh my evo. Bad IDEA. I went to the local scrap yard and pulled the car on the scales. The GF was with me...
Well I have tried to call RnR for the last 5 minutes. They must be very busy there as all I get is a busy signal. I wanted to talk to Ryan about the header before I take it off my RS and move onto the next test of the Full Race manifold. The RS has been apart waiting on suspension for the last...
Check out this dyno chart. The two comparisons are of my RS and a TME 20G with a max boost of 30 psi on race gas. The other car is a customers with a max boost of 38 psi with a GT40R. The builds are identical other than the turbo/header combinations. It's easy to see why the 20G is so much...
I am going to use this thread to do some posting over the next few weeks. So keep checking back here and on our own website for actual dyno sheets and such to get updated. Here's what's going on in our world. We dyno'd our '03 EVO when it was brand new, think 400 and some miles on it. Car was...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
