Buschur Racing's Evo X has arrived!

**Jrod@Buschur** · 02-20-2008 05:35 PM

After a delay that was longer than expected our Evo X finally arrived yesterday at the dealership and we went and picked it up today. It was unloaded from our trailer, came inside the shop for about 10 minutes just so we could check it out.......

**Jrod@Buschur** · 02-20-2008 05:36 PM

Then it headed straight to the dyno for a baseline run.

The car arrived with about a half tank of whatever gas they put in it from the factory and we added 5gallons of Sunoco 94 octane.

The thing runs fat freaking rich as others have stated and also which can be told by the dyno sheet.

Baseline #'s were 215whp / 241ft. trq

I also threw this video together for you guys.

*BUSCHUR RACING'S EVO X BASE DYNO RUN*

Now..... the catback system is already done on the car. We "finished" it about 30 min ago. I will have pictures up of that tomorrow. We put the car back on the dyno and this was the verdict.

David and Trent are working on some other items as I type this. Please check back for updates as we're just getting started!

Take care!

**Rogue** · 02-20-2008 05:53 PM

BUSCHUR RACING - Currenly US's most powerful/moded evo X... haha

**RedSleeper01** · 02-20-2008 06:21 PM

That was the gayest video i've seen. HAHAHA just messing.

I think its awesome that with 7miles you guys are modding it! Keep it up. and make the best of the new power plant!!

**scheides** · 02-20-2008 06:32 PM

Post pics of the dual exhaust!

Congrats guys!

**brian 5150** · 02-20-2008 06:39 PM

i see lots of stuff commin off that motor. im sure david and the crue are gonna have a fun time playin with this thing. david i hope this new evo suites you as well as the old one did. on a honest opinion i dont like the new looks of them but hopefully you guys get some bad ass #s off it when the new parts come out for it. good luck.

**Mortis** · 02-20-2008 07:01 PM

Congrats guys. Best of luck with it.

**t2fastalon** · 02-20-2008 08:03 PM

Congrats and good luck with it!

...see if marco will make you a intake for it

..........j/k, sorry had to say it

**vwjeff** · 02-20-2008 08:38 PM

It about time guys, good luck with the car and congrats. If it proves to be a good car, I might get one of these to

**David Buschur** · 02-20-2008 08:59 PM

VWJeff, when you get this beast of yours done you'll need a nice mellow daily driver, the EVO X will fit that for you!

**RedSleeper01** · 02-20-2008 09:11 PM

hahaha... Sell the 1g, throw away the vw

and get an evoX for the DD.

**blackout** · 02-20-2008 10:42 PM

Man I just love that car! Keep up the great work guys!

**Grizzly** · 02-20-2008 10:54 PM

I can't wait to see what you do with this Evo X.

**RedEvoVII** · 02-21-2008 06:04 AM

Thats again is a good Example that the Buschur Dyno is reading "real" Numbers.

Since the EVO X has full AYC ACD it reads stock 215WHP /240WTQ on the Buschur Dyno.
Our EU Spec Evo 7 to 9 full AYC / ACD cars showing 210 to 220 WHP at the German Dynos from Stock so Drivetrain losses around 75 HP.
That is really close to the Specs from Factory.

Good to know that Buschur is already working on the X.

Steffen
Just Solutions

**SPIN2GST** · 02-21-2008 12:38 PM

Congrats on finally getting the X guys! I knew it would be on like Donky Kong to get some parts on her.

I can't wait to see what she runs in the months ahead.

P.S. I guess my pile isn't good enough for the front row spot anymore

**Lonnie gandee** · 02-21-2008 01:14 PM

I thought the stock numbers would be higher.... Weren't the EVO9's makin like 210 on the BR dyno?

I thought the X's were supposed to be more powerful?

Wonder how long the factory clutch holds up???

It Looks pretty though.

**Spoolin0nYou** · 02-21-2008 01:57 PM

I watched a video of Al driving a Evo X, and he said the clutch feels like shit.

I'm sure within the next 6 months, there will be plenty of aftermarket clutches available to remedy this problem.

**Jrod@Buschur** · 02-21-2008 02:34 PM

*UPDATE* (in that creepy Robert Stack "Unsolved Mysteries" voice lol)

They just finished up the upper IC pipe for the X. Here is the prototype picture of what to expect. The finished piece will have the same shape and routing but it will be mandrel bent & polished. Not the welded brushed finish seen here as the prototype. We will also offer this in that "brushed" finish at a lower price.

In Polished Stainless: $295.

In Brushed Stainless: $249

The kit will come with the upper pipe, couplings and clamps.

Without further ado..... the 2 1/2" Buschur Racing Evo X Upper IC Pipe

**brian 5150** · 02-21-2008 02:36 PM

hey j rod will your evo fmic work with this car or are you gonna develope a new fmic specifically for this car? looks good though

**Jrod@Buschur** · 02-21-2008 02:37 PM

We will be designing an all new FMIC.... probably will be started today actually.

Thread: Buschur Racing's Evo X has arrived!

Thread Tools

Display

Buschur Racing's Evo X has arrived!

Posting Permissions