Ralliart xml HELP!!!

[torana]

Hey guys, I'm new to ecu flashing, have done a lot of work with microtech's and such...
I have been searching threw these forums and evolutionm.net for the past week until 2am every night, and have managed to find ALMOST all i need to continue...

I have a OP2 Tactrix cable, LM-2 Innovative WB02, Logworks3, EcuFlash, Evoscan 2.6.
and a pain in the arse 09 Ralliart...

My RomID is 53610010, USDM (Brought in Australia?).

EcuFlash doesnt have the XML file associated with this ID, I managed to find one on the forums... but cant get immobiliser code, idle, mut, and some otherstuff. It is in the list, but no box to tick and expand the options? (the first time i loaded this rom with the new xml file, it told me there was an error in the mut xml code - and wouldnt be editable untill the error fixed)

EvoScan can only show me the rpm correctly, other inputs fluctuate, but not in relation to what the sensors are actually doing/reading? is this the cause of wrong mut address'? It could also be because I have selected the wrong settings in evoscan..?

SO, Could one of you awsome people on this forum please help me with an upto date 2009 USDM RA 53610010.xml file for ecuflash and ecuscan?

ALSO, can someone tell me what settings to have in evoscan, particuly "select ecu" (I have chosen 'Mode23 USA RA EVOX')

Q: How do you work out what the correct address are for differant things you want to see/log?
Q: How would you write an xml file?

I am THANKING EVERYONE on this forum for information posted that i have learnt so much from in the past week. And in advance for any help I may recieve on my first post.

THANK YOU EVERYONE!!!

- Dan.

[bryan@GST]

No immobiliser in the Evo 10/RA roms

As far as I know, the idle and mut hasn't been defined for the 53600010 series ROM yet

What other tables are you missing.

As far as the logging, use this data file for evoscan:

http://norcalmotorsports.org/users/b...010%20Data.zip

- Bryan

[torana]

Thats great, Thank you Bryan, You seem to be one of the smartest blokes on this subject out there!
but one thing, its not 53600010, its 53610010... (inherits evo10base.xml).

Would you have a 53610010.xml file for ecuflash so i can make sure mine is wright?

Other maps unavailable (greyed out):
Fuel
Max rich AFR clip vs Coolant temp
Turbo
reactive solenoid WGDC correction interval (high gear range)
reactive solenoid WGDC correction interval (Low gear range)
reactive solenoid max total upward WGDC correction vs TPS
reactive solenoid max total downward WGDC correction vs TPS
Knock detection
Knock filter #1
Knock filter #2
Idle
Nothing is available
Misc
Only ECU ID is available
MUT
Nothing is available


Does evoscan not need a 53610010.xml in its rom directory?
With the data file you gave me for evoscan, do i just overwrite the one I have? will this work with the 53610010?

One more question, what is mode 23 (I cant seem to find a clear answer posted, everyone seems to know already, lol)

Once again Bryan, Thank you for the speedy reply and strieght out answers, with downloads! couldn't get much better than that.

- Dan

[torana]

Hi Guys, I Should get the ralliart back tomorrow to test the data.xml bryan gave me for evoscan. (lent her to a friend)

Still cant get a clean answer on what mode 23 is? (I know im stupid)

What are the Drive by wire throttle maps used for?

Thanks in advance!

[bryan@GST]

Thats great, Thank you Bryan, You seem to be one of the smartest blokes on this subject out there!
but one thing, its not 53600010, its 53610010... (inherits evo10base.xml).

Would you have a 53610010.xml file for ecuflash so i can make sure mine is wright?

Other maps unavailable (greyed out):
Fuel
Max rich AFR clip vs Coolant temp
Turbo
reactive solenoid WGDC correction interval (high gear range)
reactive solenoid WGDC correction interval (Low gear range)
reactive solenoid max total upward WGDC correction vs TPS
reactive solenoid max total downward WGDC correction vs TPS
Knock detection
Knock filter #1
Knock filter #2
Idle
Nothing is available
Misc
Only ECU ID is available
MUT
Nothing is available


Does evoscan not need a 53610010.xml in its rom directory?
With the data file you gave me for evoscan, do i just overwrite the one I have? will this work with the 53610010?

One more question, what is mode 23 (I cant seem to find a clear answer posted, everyone seems to know already, lol)

Once again Bryan, Thank you for the speedy reply and strieght out answers, with downloads! couldn't get much better than that.

- Dan

Here:

<include>53600010</include>

<table name="High Octane Timing Map" address="55957">
<table name="Load" address="60fd6"/>
<table name="RPM" address="60fa2"/>
</table>

<table name="Low Octane Timing Map" address="55b59">
<table name="Load" address="60fd6"/>
<table name="Y" address="60fa2"/>
</table>

<table name="MIVEC Intake #1" address="5db69">
<table name="Load" address="615e4"/>
<table name="RPM" address="61614"/>
</table>

<table name="MIVEC Intake #2" address="5dd69">
<table name="Load" address="615e4"/>
<table name="RPM" address="61614"/>
</table>

<table name="MIVEC Exhaust #1" address="5df69">
<table name="Load" address="615e4"/>
<table name="RPM" address="61614"/>
</table>

<table name="MIVEC Exhaust #2" address="5e169">
<table name="Load" address="615e4"/>
<table name="Y" address="61614"/>
</table>


<table name="High Octane Fuel Map" address="55027">
<table name="Load" address="60f5c"/>
<table name="RPM" address="60f36"/>
</table>

<table name="Low Octane Fuel Map" address="552d7">
<table name="Load" address="60f5c"/>
<table name="RPM" address="60f36"/>
</table>

<table name="Fuel Injector Scaling" address="536cc"/>

<table name="Injector Battery Voltage Latency Compensation" address="556d0">
<table name="Battery Voltage" address="60eb2"/>
</table>

<table name="Open Loop Load Low Octane #1" address="574fc">
<table name="RPM" address="60dc2"/>
</table>

<table name="Open Loop Load High Octane #1" address="57514">
<table name="RPM" address="60dc2"/>
</table>

<table name="Open Loop Load Low Octane #2" address="555c2">
<table name="RPM" address="60dc2"/>
</table>

<table name="Open Loop Load High Octane #2" address="555da">
<table name="RPM" address="60dc2"/>
</table>

<table name="Cylinder Fuel Trim #1" address="57df9">
<table name="Load" address="60f5c"/>
<table name="RPM" address="61a32"/>
</table>

<table name="Cylinder Fuel Trim #2" address="57fe3">
<table name="Load" address="60f5c"/>
<table name="RPM" address="61a32"/>
</table>

<table name="Cylinder Fuel Trim #3" address="581cd">
<table name="Load" address="60f5c"/>
<table name="RPM" address="61a32"/>
</table>

<table name="Cylinder Fuel Trim #4" address="583b7">
<table name="Load" address="60f5c"/>
<table name="RPM" address="61a32"/>
</table>

<table name="Reactive Solenoid Base WGDC Map #1A (High Gear Range)" address="58d39">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Reactive Solenoid Base WGDC Map #1B (High Gear Range)" address="58de3">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Reactive Solenoid Base WGDC Map #2 (Low Gear Range)" address="57393">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Boost Target Engine Load #1A (High Gear Range)" address="58e8d">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Boost Target Engine Load #1B (High Gear Range)" address="58f37">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Boost Target Engine Load #2 (Low Gear Range)" address="5743d">
<table name="Throttle" address="62672"/>
<table name="RPM" address="625f0"/>
</table>

<table name="Boost Control Load Offset" address="53484"/>

<table name="Reactive Solenoid Turbo Boost Error Correction" address="58d20">
<table name="Boost Error" address="6261a"/>
</table>

<table name="Boost Control RPM Per MPH Xover (Gear Based)" address="54686"/>

<table name="Boost Limit" address="555b4">
<table name="RPM" address="615ba"/>
</table>

<table name="Boost Cut Delay Timer" address="53068"/>

<table name="Airflow Check #1" address="5e995">
<table name="Throttle" address="624f0"/>
<table name="Y" address="624c8"/>
</table>

<table name="Airflow Check #2" address="5ea8b">
<table name="Throttle" address="624f0"/>
<table name="Y" address="624c8"/>
</table>

<table name="Airflow Check #3" address="5eb81">
<table name="Throttle" address="624f0"/>
<table name="Y" address="624c8"/>
</table>

<table name="Airflow Check #4" address="5ec8b">
<table name="X" address="62538"/>
<table name="Y" address="62512"/>
</table>

<table name="Torque Limiter #1" address="6380b">
<table name="Throttle" address="6248e"/>
<table name="Y" address="62466"/>
</table>

<table name="Torque Limiter #2" address="63901">
<table name="Throttle" address="6248e"/>
<table name="Y" address="62466"/>
</table>

<table name="Torque Limiter #3" address="639f7">
<table name="Throttle" address="6248e"/>
<table name="Y" address="62466"/>
</table>

<table name="Torque Limiter #4" address="63aed">
<table name="X" address="624d6"/>
<table name="Y" address="624b0"/>
</table>

<table name="Rev Limiter" address="5305e">
</table>

<table name="Stationary Rev Limiter" address="53442">
</table>

<table name="Speed Limiter" address="53062">
</table>

<table name="ECU ID" address="5002a" scaling="ECU ID">
</table>

[torana]

Thanks Bryan,
But once again - my knowlage has let me down... is this the guts of 53610010 or 53600010? Slightly confused...

[bryan@GST]

Thanks Bryan,
But once again - my knowlage has let me down... is this the guts of 53610010 or 53600010? Slightly confused...

53610010 but it also uses 53600010 as its base, hence the <include> in the XML

Some of the tables still aren't correct. There is still some work to be done on the RA XML.

[torana]

Hi bryan,
the above XML does not show any maps?

The one I have found to work now, I will attatch in the next post (it is <include>evo10base) - Im using an iPhone at the moment.

but im yet to test out the data file for evoscan.

Thanks guys,
- dan

[torana]

G'day mate,
tried the 2010 data.XML for evoscan, no such luck... I get2 more options for ecu selection, but it displays incorrect data nimatter what I choose. ( eg: tps is always reading 100)

any ideas?

Evoscan is my only issue now... I can't log...

[bryan@GST]

Hi bryan,
the above XML does not show any maps?

The one I have found to work now, I will attatch in the next post (it is <include>evo10base) - Im using an iPhone at the moment.

but im yet to test out the data file for evoscan.

Thanks guys,
- dan

Send me a PM with your email I will send you the XML files

[ORKHAN335]

Hello Bryan
Excuse me, but can you send me table for "Target Minimum Idle" i have RA 2009 53600010
Thank you very much