EVOscan now supporting 2010 EVO X and Ralliart!

[Fourdoordsm]

The latest and greatest EVOscan software will be out on or near this Monday! It provides basic mode23 logging for the 2010 EVO and Ralliart as well as the ability to read and clear check engine lights!

Currently the software will log the following:

RPM
Load
Timing Advance
PSIG
Knock Sum
External wide band (digital output from gauge)
TPS
Manifold Air Temp
ECT (coolant temp)
IAT (intake air temp)
speed

I have not personally verified all of these yet... just got the software bugs worked out with Hamish, and will be testing the logging out Today.

Later,

Keith

[David Buschur]

That's very good news!

[Fourdoordsm]

The current mode23 v2.7 logging on my car had the following results.

RPM WORKS
Load WORKS
Timing Advance WORKS
PSIG WORKS
Knock Sum Seems to work...no knock detected
External wide band (digital output from gauge) Not logged
TPS Works, but WOT = 86% to 87%
Manifold Air Temp Flat line negative 40
ECT (coolant temp) works but appears to be in deg C instead of deg F (83 deg at normal operating temp)
IAT (intake air temp) works but appears to be in deg C instead of deg F
speed KPH instead of MPH

So, it looks like the only real problems are the Manifold Air Temperature reading -40 and the TPS only going up to 86% or 87% at WOT. The rest is just a problem with metric units instead of imperial.

Keith